Parameters

Parameters

Q5 is a lightweight and compact delta printer developed by FLSUN on the basis of years of delta technology.
The whole machine adopts a modular structure design. B It is very convenient to assemble and maintain, and it is very friendly to users who are new to 3D printers.
Q5 uses TMC2208 drive block on XYZ axis, three axis adopts stable V-shaped pulley system, wear-resistant and anti-vibration material, movement is smoother, and printing is quieter.
The powerful Titan extruder is compatible with many common filaments on the market, especially suitable for hard filaments such as PLA.
Q5 uses a 2.4-inch TFT touch screen ，support 7 display language switching, built-in PLA/ABS one-key warm-up function.

QQ-S Pro is an upgraded version of QQ-S. QQ-S Pro uses a 32-bit motherboard and automatic leveling mode.

QQ-S Pro movement system using high-precision linear optical axis with self-lubricating graphite bearing, which can obtain good printing accuracy and quiet effect during high-speed movement.

Support offline, USB and WiFi printing modes. The powerful Titan extruder is compatible with many common filaments on the market, and is especially suitable for hard filament such as PLA. The default printing speed of

QQ-S Pro is 60mm/s, even running at 100mm/s, better printing quality can be obtained

SR is the latest Delta-based 3D printer independently developed by FLSUN.

Fast printing speed is its biggest advantage. Its default printing speed is 150mm/s (about 3-4 times that of i3 architecture), and even if it runs at 200mm/s, its quality performance is good. Compared with other ordinary 3D printers, printing the same model can save about half of the printing time!
SR uses a 32-bit high-speed motherboard with four TMC 2209 installed on the motherboard. It is quieter, more stable, and has higher printing accuracy.

The FLSUN v400 is independently developed with a delta structure to achieve 400mm/s high-speed printing, saving more than 70% of the printing time compared to other 3D printers.
The Klipper firmware is pre-installed, which is simple and convenient to use, bringing a new intelligent interactive experience.

Available Color:Natural, White , Red, Grey, Black 

Available Color: Yellow, Sea Green, Powder Pink, Baby Blue

Available Color: Wood, Pine Wood, Walnut Wood, Dark Wood

Available Color: Naturel,Ten, White, Gold, Yellow, Orange, Red, Pink, Silver, Grey, Brown, Black, Green, Blue, Purple, Claret Red

Available Color: Granite, Old But GOLD, Copper, Ruby Red, Violet, Sapphire Blue, Emerald Green

The cheapest price in the country with a guarantee!

LD-002H - A small and unique LCD printer

The CREALITY CREALITY LD-002H is a printer with MSLA technology, printing a full layer in one go! More printers from the field can be found here .

(Hardening of liquid resin by exposure to ultraviolet (UV) light projected from a unique patented LED lighting system and filtered through an LCD monitor that hides or reveals according to the shape of the printed model)

Global Creality brings you the perfect printer for creating tiny and delicate models that reach the levels of detail that printers with FDM or FFF technology are unable to produce.

This printer can fit in the field of jewelry, dental clinics, fine mechanics, miniatures, tiny mechanical parts and even less. Uncompromising levels of accuracy are required there both in terms of details and in terms of level of finish.

The CREALITY LD-002H printer produces models with the same level of finish as a finished product without layer marks.

This amazing MSLA printer is capable of supporting many types of resin materials, including: standard resin, PA nylon, ABS-like, high-temperature-resistant materials, flexible materials and even vanishing wax designed to produce models that will then be sent to cast metal just like a jewelry making process. Yes, you heard right, you can make jewelry models.

The CREALITY LD-002H printer comes as a complex unit with mechanics, beautifully built, and does not require calibration at all! The printer comes out of the package and immediately goes to work.

This printer is globally acclaimed and is even considered the fastest on the market today with a layer print measurement in less than 2.5 seconds! (ABS-LIKE material).

To ensure quality and reliability over time, Frozen has not compromised on the components. You will admire the printer using a large and colorful touch screen with a simple and convenient interface as only Frozen can do and enjoy a smooth and comfortable printing experience!

CREALITY LD-002H Printer Features:

• Over 2000 hours of printing - (monochrome screen longevity)
• Fast printing - 2.5 seconds per layer!
• Offline printing using the touch screen - access to an on-key disk.
• Upload file from disk and key
• High accuracy and print quality using a LED array with focus lenses
• Reducing the need for maintenance by using precise mechanics - high-quality linear bearing, and reduced moving parts
• Built-in working temperature control - for maintaining the internal electronics
• A wide variety of raw materials can be used in addition to the original ones - such as raw materials with a wavelength of 405 nm.
• Easy and convenient use without the need for calibration
• An upgraded version of the LD-002R model,Includes charcoal filter and monochrome screen!

CREALITY LD-002H Printer Technical Data:

• Printing technology:LCD
• Print size: 160 * 82 * 130 mm
• Layer thickness:0.01-0.3 mm
• Print speed:50 mm / hour
• Resolution (layer thickness):0.0625mm
• Accuracy level: 51Micron in axes X, Y
• light source:405nm - 8000uw / ​​cm²
• Material Type:Liquid resin
• Printer weight:4.5 kg
• Net printer dimensions:221x221x403 mm

FILAMENT DRY BOX

The innovative storage box from Creality serves as a storage compartment for raw materials for FDM / FFF printers.

Its purpose is to protect the raw materials from moisture absorption, accumulation of dust and various contaminants and thus  significantly improve the print quality mainly due to the fact that it retains sensitive materials like PLA and nylon.

The box contains two features that are a significant advantage:

1. Automatic weighing - The box contains an automatic weight that calculates the amount of material in the roll and saves the hassle of changing materials in the middle of printing.

Electronic drying system - the Creality storage box dries moisture and allows heating of the storage compartment so that old materials lose the accumulated moisture and renew their function and efficiency. In addition, there are materials from which the removal of moisture gives them a much cleaner and higher quality print. 

ENDER-3 MAX is the sequel to Ender-3. Comes with a Meanwell power supply (quiet American power supply), a glass surface and a tool drawer attached to the printer.

The ENDER-3 MAX boasts the same exceptional performance as the Ender-3, while the upgraded components make it more stable, durable and easier to operate.

For the first three years, Reality continues to produce a very high-quality production line of 3D printers at affordable prices.

High quality 3D printer and excellent value for money.

Unlike complete or closed printers, the ENDER-3 PRO comes as a "kit" that needs to be assembled.

Although a small investment of assembly time is required, very quickly the printer is ready to use and can make prints!

Components of the ENDER-3 MAX printer:

• Large color graphic screen

• Number of extrusion mechanisms (nozzles): 1

• Type of extrusion mechanism: Remote, single gear

• Automatic leveling: None

• Control panel: 32 bit

• Silent TMC2208 stepper motor drivers

• Axial movement: Cartesian

ENDER-3 MAX printer support:

• In the materials: PLA, PETG, WOOD, FLEX, TPU and more.

• Files: G-Code

• Operating systems: Linux, Windows, OSX

• Slicer: CURA, Simplify 3D, Repetier, Prusa Slicer

• Connectivity: SDCARD, USB